Little Pinkie, PSU for Musical Fidelity X-CAN V3

Little Pinkie V3i (for X-Can v2 etc.) Hand Made in Scotland

Dual output version also available (powers two x-ponents)

The Little Pinkie v3i is the successor to the very popular Little Pinkie v3 which pleased many music lovers the world over. Featuring a custom made transformer using only the highest grade of materials the Little Pinkie v3i delivers sonics that are really out of this world. This is a real "bang for your buck" product and it delivers the goods big time, see what others think of it here.

Little Pinkie V3 is a no nonsense high quality PSU housed in a sturdy ABS enclosure. To the rear is an IEC socket (AC mains in) and a high quality 2.1mm DC socket. The Little Pinkie to X-Ponent (X-CAN V2, X-10D, X-LPS etc.) is connected by a 2 metre cable which incorporates a snap on ferrite ring to soak up any nasties and ensures only clean voltage enters the x-ponent (there is also a class X2 suppression capacitor inside the Little Pinkie which ensures the voltage into the Pinkie is clean too) All connections are hard wired with silver loaded solder.

on / off switch now fitted to Little Pinkie V3i as standard

Situated at the front of the unit is a an on / off switch. It's a good quality, sub miniature toggle type and affords the user the convenience of being able to switch the Little Pinkie V3i off without having to clamber about at the mains socket.

The "engine" is a top quality 30VA (2500mA) transformer custom made to my own very demanding specifications in the UK employing the finest grade laminations money can buy. It features twin double section bobbins (4 coil structure) which provides maximum isolation and achieves a low interwinding capacitance. It also has an integral self resetting thermal trip so is bullet proof in operation. Absolutely silent with no discernable "buzz" or heat build up, this beauty runs as cool as a cucumber and has oodles of current on tap to satisfy even the most demanding of musical climaxes... she certainly won't run out of steam, that's for sure!.

Each unit is hand built (to order) by myself from my workshop in Scotland using the finest of materials and first class construction techniques. The Little Pinkie v3i costs £75 built and tested (dual output version costs £85) Contact Me to order.

Postage, Packaging and Shipping costs:

UK £7 Europe £11 USA / ROW £15. Shipping to all destinations will be via Trackable / Recorded delivery.

Specifications

Power output: 12 Volts AC 30VA (2 x 15VA for dual version)
Power requirement: 115 / 230 Volts AC 50 / 60Hz (115V "or" 230V versions)
Transformer type: twin double section bobbins
Typical Regulation: (%) 15
Dimensions: L-130mm x W-70mm x H-60mm
Weights: Net : 900gram Packed: 1.30kg
Internal Transformer: Designed, tested, approved and certified to EN60950 and CE Marked

For more details or to order a Little Pinkie V3i please Contact Me



			Little Pinkie V3i PSU for X-CAN V2
			X-LPS, X-10D, X-DAC, X-PRE, X-Tone
			Little Pinkie V3i (for X-Can v2 etc.) Hand Made in Scotland Dual output version also available (powers two x-ponents) The Little Pinkie v3i is the successor to the very popular Little Pinkie v3 which pleased many music lovers the world over. Featuring a custom made transformer using only the highest grade of materials the Little Pinkie v3i delivers sonics that are really out of this world. This is a real "bang for your buck" product and it delivers the goods big time, see what others think of it here. Little Pinkie V3 is a no nonsense high quality PSU housed in a sturdy ABS enclosure. To the rear is an IEC socket (AC mains in) and a high quality 2.1mm DC socket. The Little Pinkie to X-Ponent (X-CAN V2, X-10D, X-LPS etc.) is connected by a 2 metre cable which incorporates a snap on ferrite ring to soak up any nasties and ensures only clean voltage enters the x-ponent (there is also a class X2 suppression capacitor inside the Little Pinkie which ensures the voltage into the Pinkie is clean too) All connections are hard wired with silver loaded solder. on / off switch now fitted to Little Pinkie V3i as standard Situated at the front of the unit is a an on / off switch. It's a good quality, sub miniature toggle type and affords the user the convenience of being able to switch the Little Pinkie V3i off without having to clamber about at the mains socket. The "engine" is a top quality 30VA (2500mA) transformer custom made to my own very demanding specifications in the UK employing the finest grade laminations money can buy. It features twin double section bobbins (4 coil structure) which provides maximum isolation and achieves a low interwinding capacitance. It also has an integral self resetting thermal trip so is bullet proof in operation. Absolutely silent with no discernable "buzz" or heat build up, this beauty runs as cool as a cucumber and has oodles of current on tap to satisfy even the most demanding of musical climaxes... she certainly won't run out of steam, that's for sure!. Each unit is hand built (to order) by myself from my workshop in Scotland using the finest of materials and first class construction techniques. The Little Pinkie v3i costs £75 built and tested (dual output version costs £85) Contact Me to order. Postage, Packaging and Shipping costs: UK £7 Europe £11 USA / ROW £15. Shipping to all destinations will be via Trackable / Recorded delivery. Specifications Power output: 12 Volts AC 30VA (2 x 15VA for dual version) Power requirement: 115 / 230 Volts AC 50 / 60Hz (115V "or" 230V versions) Transformer type: twin double section bobbins Typical Regulation: (%) 15 Dimensions: L-130mm x W-70mm x H-60mm Weights: Net : 900gram Packed: 1.30kg Internal Transformer: Designed, tested, approved and certified to EN60950 and CE Marked For more details or to order a Little Pinkie V3i please Contact Me